Thanks!
I definitely dig Candlemass and a lot of Pentagram; the Melvins I never really got into though. My settings:
Room EQ about 9:00 position
Voice 7 Warm Hi Gain
Drive 85
OD 70
Master 79
Lo +10
Mid -2
Hi 0
Pres +4
100Hz +10
170 +2
280 0
470 +6
800 -2
1.3 0
2.2 0
3.8 +4
6.3 0
Comp, Wah, Chorus, Trem, all Out. Gate as needed.
MT200 poweramp's Presence always at about 10:00 position.
The speakers I have in my cabs have a LOT to do with making this setting sound good. Using this setting at a low volume won't have good results. Even using this setting with my Quad Tube cranked up, the G12T-75 speakers just won't color it in the same way you hear in these clips. Pulling the Direct signal from the preamp to the board is not the same sound either. It's all in the speakers and making them bark a bit. There's a Celestion V-Type and an Eminence (unknown model) in each of my 4x12 cabs (but only wired for 2x12) I definitely like the V-Type speaker; I may replace the unknowns with V-Types soon.