ADA Depot - A Forum To Support Users of ADA Amplification Gear

Please login or register.

Login with username, password and session length
Advanced search  

News:

Lets get Technical > All Things Tube All about preamp and power amp Tubes.

Pages: [1]   Go Down

Author Topic: Need stupid little parts....help?  (Read 4422 times)

0 Members and 1 Guest are viewing this topic.

potus2028

  • Newbie
  • *
  • Offline Offline
  • Posts: 31
Need stupid little parts....help?
« on: Time Format »

Hey everyone....I'm in need of the two front faceplate screws for my MP-1 and two rubber feet for an MC-1. Anyone got any leads? Could use a few top/bottom panel screws, also...

Thanks.
Logged

rnolan

  • Administrator
  • Superhero Member
  • ******
  • Offline Offline
  • Posts: 5999
Re: Need stupid little parts....help?
« Reply #1 on: Time Format »

MJMP may have some bits ? send him a PM or contact via his site (http://www.marshalljmpmodshop.net/index.htm),
Logged
Studio Rig: Stuff; Live Rig: More Stuff; Guitars: A few

MarshallJMP

  • Superhero Member
  • ******
  • Offline Offline
  • Posts: 4702
    • marshalljmpmodshop.net
Re: Need stupid little parts....help?
« Reply #2 on: Time Format »

You mean the scrzews in the middle that hold the bracket,or the ones near the rack ears?
Logged

potus2028

  • Newbie
  • *
  • Offline Offline
  • Posts: 31
Re: Need stupid little parts....help?
« Reply #3 on: Time Format »

The two in the middle. One of them is actually there, but it's not "grabbing on" to anything...also two rubber feet for an MC-1???
Logged

MarshallJMP

  • Superhero Member
  • ******
  • Offline Offline
  • Posts: 4702
    • marshalljmpmodshop.net
Re: Need stupid little parts....help?
« Reply #4 on: Time Format »

Well it seems like the thread in the bracket is busted,so a new screw won't help.Anyway those screws i don't have,but you should be able to find them in a hardware store,same for the rubber feet.I do have the panel screws.
Logged

RandallRG

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 254
Re: Need stupid little parts....help?
« Reply #5 on: Time Format »

Yeah Marshall I was going to say obviously if the brackets not "grabbing" the hole is "Stripped" out on it & it's very easy to happen on them. Those holes are so small anyway....time for another bracket or possibly a bigger screw that will grab if the threads are not completely gone on it? 

***By the way Dude....There not "Stupid Little Parts" if you NEED them...***   ;)
« Last Edit: Time Format by RandallRG »
Logged

potus2028

  • Newbie
  • *
  • Offline Offline
  • Posts: 31
Re: Need stupid little parts....help?
« Reply #6 on: Time Format »

Took a better look....the inner bracket isn't lines up with the hole on the faceplate...so even though the one screw I do have is a little messed up, it will probably work when I get i side and re-align the clip...still need two screws though. I'll see what I can find. No "mom and pop" hardware stores around here...just Lowes and HD....I'll see what I can find. Thanks guys!
Logged
Pages: [1]   Go Up