ADA Depot - A Forum To Support Users of ADA Amplification Gear

ADA Preamps => MP-2 => Topic started by: rnolan on August 01, 2014, 06:24:10 AM

Title: My MP2 Clean Sound
Post by: rnolan on August 01, 2014, 06:24:10 AM

Here's a tracks using my main MP2 clean patch (see MP2 patches)
Let me know what you think..

Title: Re: My MP2 Clean Sound
Post by: MarshallJMP on August 03, 2014, 01:54:35 AM

Nice!! like the sound,will try it out in my mp-2.

Title: Re: My MP2 Clean Sound
Post by: rnolan on August 03, 2014, 05:57:56 AM

Cool, glad you like it.  As mentioned in the patch post, the sound relies on the PU settings.  I have my middle PU as low and as far from the strings as it will go (or I hit with the pick).  While single coil size, the Ultrasonics are dual coil and the wiring on the anderson is a 3 way toggle for each PU, down parallel, middle off, up series.  So I have the neck PU in parallel and the middle (lowered) PU in series, produces the "glassy" sound. Also depending which PU you use (as the Ultrasonic are very flat feq response) you may need to dip the mids and boost bass.
Anyway, very interested to hear how you go with it.