ADA Depot - A Forum To Support Users of ADA Amplification Gear

Miscellaneous => ADA Sound/Audio Clips & Bits => ADA MP1 Channel => Topic started by: monty on May 23, 2015, 12:43:16 PM

Title: MP1 Channel clips
Post by: monty on May 23, 2015, 12:43:16 PM
Hey guys...here are a few snippets so far. These are direct into the ADA GCS3 cab simulator and sent out to a monitor.

https://instagram.com/p/2955-ITblu/?taken-by=monty_jay

https://instagram.com/p/294sPbzbj1/?taken-by=monty_jay
Title: Re: MP1 Channel clips
Post by: rnolan on May 24, 2015, 03:51:13 AM
Hey monty, not bad  :thumb-up: and thanks for posting. Nice edge to the distorted patch and very MP1 sounding, maybe a little bit more raw ? if that makes sense.
Title: Re: MP1 Channel clips
Post by: MarshallJMP on May 24, 2015, 05:33:04 PM
Well i also think it sounds more raw.
Title: Re: MP1 Channel clips
Post by: rabidgerry on May 25, 2015, 03:46:08 AM
sounds pretty good.  That riff you keep playing over and over again sounds like someone having an epileptic fit lol

tone wise it sounds nice and dense.  I will be honest I didn't hear too much variation.  But I still liked it.

Heard more variation on the clean clips.
Title: Re: MP1 Channel clips
Post by: El Chiguete on May 25, 2015, 05:50:45 AM
To be honest Im not impress by the tone.
Title: Re: MP1 Channel clips
Post by: rnolan on May 25, 2015, 06:37:16 AM
I thought it  had some promise, not as good as MP1 (and no where near as good as MP2  mmmm), but depending what you want, it's certainly better than 90% of the stuff that's out there as a stomp box. IMO it would sound much better with some Mullard long plates.. And they are silly IMO  to ignore that, particularly specially selected low noise high gain tubes are one thing, but they all sound soooo different. Get on board guys.... hear the difference, it would probably sound almost reasonable with some Mullard long plates (but then that's what I like, and they do show up bad playing, so maybe a factor ??). Personally I think AD/A is going in the wrong direction, concentrating on stomp boxes and stuff for the old school plug into guitar amps.  But hey it's their company,  it's no secret I like MP1, and much much better MP2, good clean power amp stereo cabs, decent digital or analogue FX, floats my boat.. I was hoping for better, I'd like somethng new to replace my aging MP2's, seems that's not going to happen unless I do it myself.
Title: Re: MP1 Channel clips
Post by: rabidgerry on May 25, 2015, 09:27:22 AM
I thought it  had some promise, not as good as MP1 (and no where near as good as MP2  mmmm), but depending what you want, it's certainly better than 90% of the stuff that's out there as a stomp box. IMO it would sound much better with some Mullard long plates.. And they are silly IMO  to ignore that, particularly specially selected low noise high gain tubes are one thing, but they all sound soooo different. Get on board guys.... hear the difference, it would probably sound almost reasonable with some Mullard long plates (but then that's what I like, and they do show up bad playing, so maybe a factor ??). Personally I think AD/A is going in the wrong direction, concentrating on stomp boxes and stuff for the old school plug into guitar amps.  But hey it's their company,  it's no secret I like MP1, and much much better MP2, good clean power amp stereo cabs, decent digital or analogue FX, floats my boat.. I was hoping for better, I'd like something new to replace my aging MP2's, seems that's not going to happen unless I do it myself.

who has to get on board what Richard?

The reason ADA are the direction they are going is because rack gear is not as popular anymore FACT.  I played with 3 bands in the last year out of say 100 bands over all the gigs I've played consisting of 3-4 bands on each bill.  Some of the bands didn't know what rack gear was  :dunno:

I bought an MP1 last year as you know and I showed it to a guy, fellow contemporary musician and he didn't know what the f*ck it was either!! He actually didn't know what it was for and there was me bragging I actually got an MP1 hahaha So that suggests to me that rack despite being used by 1000's of professionals still, is just not thrust in the public's faces anymore like it used to be.  It's a certain breed now who use rack stuff in my opinion.


The ADA Mp1 channel in my opinion is just another pedal with tubes in it of which there are a gazillion!! It's never gonna be a full rack mp1 is it?  Nope, it couldn't be.  But I'm sure it might get close on occasion or might sound decent sometimes.
Title: Re: MP1 Channel clips
Post by: El Chiguete on May 25, 2015, 09:53:06 PM
Yeha I understand that even tho racks are used by 1000s of professional players and a lot of players like is I think we are still 10%-20% of the market??? Well maybe thats not enough to make you and do new rack products but at least give us a midi capable preset pedal version of the MP-1!!! I think that would sell!
Title: Re: MP1 Channel clips
Post by: rabidgerry on May 26, 2015, 12:14:01 AM
Yeha I understand that even tho racks are used by 1000s of professional players and a lot of players like is I think we are still 10%-20% of the market??? Well maybe thats not enough to make you and do new rack products but at least give us a midi capable preset pedal version of the MP-1!!! I think that would sell!

I have the best idea......................................... :???:

A new rack MP unit  :whoohoo!:

Who knows why a company decides to only do pedals.  May be ADA being smallish feel that for them to do a rack might not be cost effective as they are only appealing to a small section of the market, albeit a section of the market that is always there but not big enough for them to want to concentrate their efforts solely and not economical enough for them to continue alongside stomp boxes.

I'm sure MP1 channel will be of use to a stomp box using type of guy.  Indeed someone with a similar set up to my own might prefer the pedal in FX loop to use freely when ever they want or use it as their main pre in the loop but I'll stick with the rack.................looks cooler anyways  :lol:
Title: Re: MP1 Channel clips
Post by: Systematic Chaos on May 26, 2015, 02:47:55 AM
What keeps me thinking....: wasn't MP-1 meant to read Midi Preamp back in the day?!?!?
If so, the new stomp should have been named P-1 Channel cuz there's no Midi in the box.... :???:
Title: Re: MP1 Channel clips
Post by: rnolan on May 26, 2015, 07:13:08 AM
Hey RG, by get on board, they have selected the usual low noise high gain tubes option, yeah good, but they all sound so different, anyone one who thinnks they are all the same has rocks in their head IMO.  From Monty's clip, it sounds ok, but could sound heaps better IMO with better (more interesting) tubes depending on the sound you want to make), and as you say there are other tube stomp boxes out there, so to set themselves appart, pick 12AX7s' that are interesting... anyway that was my thinking.... The ones they picked are a bit boring IMO but then we have done quite allot of tube rolling and comparisons here. So it's kind of like, with all this talk at your disposal (and it's not just our site), why would you use such boring plain  tubes ??? anyway that's how they sounded to me...
Title: Re: MP1 Channel clips
Post by: El Chiguete on May 27, 2015, 08:54:26 AM
What keeps me thinking....: wasn't MP-1 meant to read Midi Preamp back in the day?!?!?
If so, the new stomp should have been named P-1 Channel cuz there's no Midi in the box.... :???:

Yep the new one should me called ADA P-1!
Title: Re: MP1 Channel clips
Post by: rnolan on May 28, 2015, 05:38:36 AM
Hey El, well not really, Monty said it isn't a preamp but you can use it as one, it's instrument level out (I think he said ??) so designed to go into a stomp box chain/board.
It would probably work well in some FX loops but probably not well with line level devices (although it has its own loop in which you "could" use a line level mono FX ? I think it copes with that ??) So maybe should be called ADA Stomp 1, or Distortion 1 ??
Title: Re: MP1 Channel clips
Post by: monty on June 04, 2015, 05:52:32 PM
Lots of good info here guys and again, this isn't the last that you will see from ADA ;) So please keep that in mind. It is well known what is on everyone's wish lists.

The MP1 designation has more to do with referencing the tone and inspiration, not the direct correlation to the product. Yes, mp1 is midi preamp....but just like these days you have guys making a P-Bass or J-Bass...we know what its in reference too. It's not a jazz bass...but its referencing that realm. The MP1 channel references it being in relation to the original MP1 tube path.

Because it is seen in a pedal chassis, it can be a little confusing. Or maybe better said, underestimated. It's not a distortion pedal. Technically, no it isn't a preamp either but in most ways, it makes sense to think of it as one. Many will want to run it in front of their amp like you would a distortion or overdrive pedal. If that works for them, cool. If not, others will run it into the fx return or a dedicated powreamp, using the MP1C as a preamp. This is how I have been running my unit and it works very, very well.

As far as clips and videos go....its being worked on, lol. My current setup isn't ideal and while I could do some direct clips via the ADA GCS3, I am guessing most people won't really be interested in that and still want to hear the MP1C through a more conventional setup. If any of you can do some seriously good videos, please send me a few links and your info.

For now, here's a longer iPhone video clip:

https://www.youtube.com/watch?v=cRa3EF52MN0
Title: Re: MP1 Channel clips
Post by: rnolan on June 05, 2015, 12:56:39 AM
Hey Monty, sounds pretty good  :thumb-up: I can see/hear how it would fit in nicely with some setups, you could use it in the MP1 loop also (sort of 4TM LoL) or in front, also handy if you need to give a patch a quick bit of eq on the fly.

Have you read the posts re what we wanted in a MP3, some good ideas there.
Title: Re: MP1 Channel clips
Post by: Soloist on September 28, 2015, 10:38:04 AM
I feel to many younger players today get stuck in the amp modelers, Line 6 HD500, Kempler ect. While they sound awesome for recording they lack that tube amp feel when used live. I know cause I have tried them. As rabidgerry says they are pretty soulless. Many older guitarist I know and most pros still use rack rigs. I could see ADA's latest offering having a place in a some guitarist arsenal however just not in mine. That's just my preference though.
Title: Re: MP1 Channel clips
Post by: rnolan on October 01, 2015, 08:05:44 AM
Hey Soloist, +1  :thumb-up: and maybe a salient/applicable metaphor is that most new guitarist learn to tune their instrument with a guitar tuner these days. I had a tuning fork and a pitch pipe when I started... The danger of modeling amps (in some ways) is they make it to easy to sound "ok(ish)" and the player doesn't have to learn to play properly. Hey modeling amps have their place, I don't have one, MP2 works great for me.
Title: Re: MP1 Channel clips
Post by: Chris5150 on August 13, 2020, 02:51:33 PM
Here's my take, there is a long explanation of the signal chain in my thread in the ADA MP1 channel section. It takes a lot to make this thing really show it's potential but it really is a bad ass little pedal.