ADA Depot - A Forum To Support Users of ADA Amplification Gear

Please login or register.

Login with username, password and session length
Advanced search  

News:

Lets get Technical > All Things Tube All about preamp and power amp Tubes.

Pages: [1] 2   Go Down

Author Topic: Other MP-1 footswitch options?  (Read 13890 times)

0 Members and 1 Guest are viewing this topic.

odeonmaxx

  • Newbie
  • *
  • Offline Offline
  • Posts: 10
    • OdeonMax Music
Other MP-1 footswitch options?
« on: Time Format »

Has anyone tried the Randall RF8 midi switch? Seems it might work well. And has phantom power.

http://www.randallamplifiers.com/th_product/rf8/

Any input would be greatly appreciated.

This most likely has been posted before, but I purchased a power adapter from Parts Express for the MPC foot controller I acquired. 120-035 for the adapter, 120-086 for the tip. Unfortunately, the MPC was a complete mess and got my money back. Now I have a MPC I can't use. Anyone interested in parts? It didn't power on seperatly, but powered on through phantom power. And only 3 or 4 buttons seem to work. So I'm not sure if there is anything I can do with it.

Logged
ADA MP-1 - MosValve - Carvin 2x12

MarshallJMP

  • Superhero Member
  • ******
  • Offline Offline
  • Posts: 4702
    • marshalljmpmodshop.net
Re: Other MP-1 footswitch options?
« Reply #1 on: Time Format »

For me personally not good, there are only 8 presets you can switch,there is no bank up or down,no info about the midi channel it's sending.Looks very limited to me,for that price you can buy something better.Something that can switch at least 100 presets.Like the behringer fcb1010 which is cheaper and has way more options.
Logged

MikeB

  • Full Member
  • ***
  • Offline Offline
  • Posts: 247
Re: Other MP-1 footswitch options?
« Reply #2 on: Time Format »

The Behringer FCB1010 also has a number of mods available that can further refine its usefulness (just check the internet with your favourite search engine).  I'm using the Uno revision and it's great.  There also a variety of PC interfaces that make programming it a lot easier.  My only criticisms are that it is a little bulky and doesn't really have that industrial feel that is comforting to have in a foot switch.
Logged
I don't feel tardy!

Systematic Chaos

  • Administrator
  • Hero Member
  • ******
  • Offline Offline
  • Posts: 705
  • Blood type: Becks Positive
Re: Other MP-1 footswitch options?
« Reply #3 on: Time Format »

There´s a lot on the occasion market (eBay,.....)
"Old" Rocktron MidiMate, ART X11, Midi Buddy,.......just to name a few that pop up on a regular basis for small $$.
I recently picked up a Digitech Control 7 for 30€. 128 Presets in Banks of 5. Does all its supposed to do.
Logged

odeonmaxx

  • Newbie
  • *
  • Offline Offline
  • Posts: 10
    • OdeonMax Music
Re: Other MP-1 footswitch options?
« Reply #4 on: Time Format »

I'm also only going to use 4 or 5 presets so only having 8 is more than I need. But I did want something smaller than the Behringer. and I have no need for expression pedals. I have an MP-1 to a Mosvalve, that's all I need. A pedal or two maybe.

Thanks!!

Logged
ADA MP-1 - MosValve - Carvin 2x12

odeonmaxx

  • Newbie
  • *
  • Offline Offline
  • Posts: 10
    • OdeonMax Music
Re: Other MP-1 footswitch options?
« Reply #5 on: Time Format »

Also would like something phantom powered, if possible.

Logged
ADA MP-1 - MosValve - Carvin 2x12

MarshallJMP

  • Superhero Member
  • ******
  • Offline Offline
  • Posts: 4702
    • marshalljmpmodshop.net
Re: Other MP-1 footswitch options?
« Reply #6 on: Time Format »

Well i only know 4 pedals with 7 pin midi connectors,the rocktron midi mate and the 3 ADA pedals (MC-1,MPC,MXC).
Logged

Systematic Chaos

  • Administrator
  • Hero Member
  • ******
  • Offline Offline
  • Posts: 705
  • Blood type: Becks Positive
Re: Other MP-1 footswitch options?
« Reply #7 on: Time Format »

There's some more... My Lexicon R1 has PhPwr, the old DMC Ground Control had it, ART X11 as well.

But modding one of the small (digitech Control 7 or Control 8, Rolls MidiBuddy, Nobels MF1) to Phantom Pwr shouldn't be that big a deal.
Swap the 5pin for a 7pin and bridge the DC connector to the respective 2 pins of the now 7pin midi connector.....
« Last Edit: Time Format by Systematic Chaos »
Logged

Peter H. Boer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 564
  • 2* MB-1 1*MP-1 + Jur's old Mod4Mk2
    • The Granny Attic
Re: Other MP-1 footswitch options?
« Reply #8 on: Time Format »

I'm using Roctron Midimate myself, but for a friend I modiefied a Boss FC200 to accept a 7 pin cable (plenty of room on the back to add a 7 pin terminal)
 :thumb-up:
Logged
Nothing beats MB-1s and MP-1s with MDRTs

http://www.thegrannyattic.com
http://www.Illumion.net
http://www.sote.nl

Systematic Chaos

  • Administrator
  • Hero Member
  • ******
  • Offline Offline
  • Posts: 705
  • Blood type: Becks Positive
Re: Other MP-1 footswitch options?
« Reply #9 on: Time Format »

Phantom powered Uno Modded FCB1010 for 100$:
http://forum.grailtone.com/viewtopic.php?f=18&t=68532
Logged

Satch

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 61
Re: Other MP-1 footswitch options?
« Reply #10 on: Time Format »

I use the Rocktron midi mate and love it. Best feature you can custom name all your presets :)
Logged

odeonmaxx

  • Newbie
  • *
  • Offline Offline
  • Posts: 10
    • OdeonMax Music
Re: Other MP-1 footswitch options?
« Reply #11 on: Time Format »

Is the Rocktron Midimate powered the same way as an MC-1? Plug in the adapter to the back of the MP-1, connect 7 pin cable? Being the ADA adapter is only 500ma and the Rocktron has 800ma, both 9V, will this harm the MP-1 in any way? I assuming it would be OK.





« Last Edit: Time Format by odeonmaxx »
Logged
ADA MP-1 - MosValve - Carvin 2x12

MarshallJMP

  • Superhero Member
  • ******
  • Offline Offline
  • Posts: 4702
    • marshalljmpmodshop.net
Re: Other MP-1 footswitch options?
« Reply #12 on: Time Format »

No problem using the midi mate.
Logged

odeonmaxx

  • Newbie
  • *
  • Offline Offline
  • Posts: 10
    • OdeonMax Music
Re: Other MP-1 footswitch options?
« Reply #13 on: Time Format »

Awesome. Thanks!!

Logged
ADA MP-1 - MosValve - Carvin 2x12

MikeB

  • Full Member
  • ***
  • Offline Offline
  • Posts: 247
Re: Other MP-1 footswitch options?
« Reply #14 on: Time Format »

Ok.  I'm going to withdraw my endorsement of the Behringer FCB1010.  This is related to my concern that it seems a bit light weight and possibly not so durable.  I recently noticed that there was something rattling around inside mine and when I took the cover off I found that the spring retainer for one of the pedals had broken.   :facepalm: :poop: >:(  It is plastic and therefore breaks easily and is more or less unrepairable without a bit of re-engineering.  Luckily for me, I am still just within the warranty period so I can get it fixed.  I imagine that this is going to be an ongoing problem in the long term and so I just can't recommend this footswitch, even though it does have some great functionality.  It would be great if they could build one that would actually survive on stage (I haven't even done that).

Mike
Logged
I don't feel tardy!
Pages: [1] 2   Go Up