• Welcome to ADA Depot - A Forum To Support Users of ADA Amplification Gear.
 

News:

Need a Schematic? Check the Vault *MP-1 Classic Schematics Just Added!!

Main Menu

MP-2 and Multi-FX

Started by Griphook, July 27, 2018, 01:19:49 AM

Previous topic - Next topic

rnolan

Hey Feki, no worries  :wave: , what EPROM do you have in your MP2 ?  It will display the version when you turn it on. The last EPROM (firmware) upgrade was v1.41 (you can buy one here http://www.marshalljmpmodshop.net/miscellaneous_parts_and_replacement_tubes.htm if yours is older).  The later EPROM has a fix for the slow patch change in the MP2, when they first came out it was the one thing that bugged me, very slow patch changes, but they fixed it pretty quickly with a new EPROM.  If you have 1.41 EPROM, you can change the program change speed to fast (IIRC it's in the midi menus).  Also run your midi switcher into the MP2 midi in and the GMaj off the MP2 midi through (if you don't already).
Studio Rig: Stuff; Live Rig: More Stuff; Guitars: A few

Dante

Quote from: Griphook on August 07, 2018, 01:09:50 PM
Hey Folks,
thanks for your Input!
Dante, how do you use the 4CM to get a mono signal?
Quote from: Dante on August 06, 2018, 07:33:35 PM
I use a multi effects in the loop of my MP2. I run it mono, using the 4CM (four cable method). The dang PA is mono anyway, it does me no good to run stereo...I'm the only one that hears it. Tone is

I run out of one side (A), just as MJMP suggests. That works for a 1x12 combo or a mono 4x12 all day ;)


Feki

Hi, I have the Last EPROM (firmware) upgrade was v1.41
I have 4 cable, latency on MP2 between preset switch none.The problem still persists in FX. the maximum for MP2 is 30% more is: eat a lot of drive signal. G-major I have a 100% mix and it's still not enough for my solo.  I only need Delay for solo, does anyone have any other experience, like Boss DD-3 etc ...

rnolan

To check you are using fast patch change with v1.41:System Edit -> (Midi Function Menu), press < (Memory Protect is off), press < (Restore System Defaults), press < (Program Change Speed -> Fast (press V(NO) or ^(YES) to toggle between normal and fast)).  The "normal" speed is quite slow, change it to fast.
Have you turned up the delay input and output levels within the GMaj patch ?  Each Fx in GMaj will also have level settings (in, out, where (which Fx) the input to delay comes from etc) so you can adjust them compared to each other and also which Fx come before the other.
Studio Rig: Stuff; Live Rig: More Stuff; Guitars: A few

Feki

G-Major problem like me, has other guitarists. Delay-controlled midi and re-set was my priority, and I found Flachback x4.
I had to drill a hole for the Tap Tempo connector on the floor "Switch - EB"
https://photos.app.goo.gl/2MPxAkdTBnR1r8gk9
I made several sounds of ADA MP2, CLEAN, CRUNCH AND DRIVE 1,2,3.
Drumset bases, without modification from the XLR.
https://drive.google.com/file/d/1DX7fJeLs0kbW3_4Py6kQPqGeXZNi25UT/view?usp=sharing