ADA Depot - A Forum To Support Users of ADA Amplification Gear
Let's Get Technical => All PREAMP Tech Tips & Support => Topic started by: potus2028 on May 28, 2014, 09:51:38 AM
-
Hey everyone....I'm in need of the two front faceplate screws for my MP-1 and two rubber feet for an MC-1. Anyone got any leads? Could use a few top/bottom panel screws, also...
Thanks.
-
MJMP may have some bits ? send him a PM or contact via his site (http://www.marshalljmpmodshop.net/index.htm),
-
You mean the scrzews in the middle that hold the bracket,or the ones near the rack ears?
-
The two in the middle. One of them is actually there, but it's not "grabbing on" to anything...also two rubber feet for an MC-1???
-
Well it seems like the thread in the bracket is busted,so a new screw won't help.Anyway those screws i don't have,but you should be able to find them in a hardware store,same for the rubber feet.I do have the panel screws.
-
Yeah Marshall I was going to say obviously if the brackets not "grabbing" the hole is "Stripped" out on it & it's very easy to happen on them. Those holes are so small anyway....time for another bracket or possibly a bigger screw that will grab if the threads are not completely gone on it?
***By the way Dude....There not "Stupid Little Parts" if you NEED them...*** ;)
-
Took a better look....the inner bracket isn't lines up with the hole on the faceplate...so even though the one screw I do have is a little messed up, it will probably work when I get i side and re-align the clip...still need two screws though. I'll see what I can find. No "mom and pop" hardware stores around here...just Lowes and HD....I'll see what I can find. Thanks guys!