Let's Get Technical > Power Amp Tech
ADA Microtube 200 Help Needed
davec69:
Yes. I'm measuring the diode adjacent to R31.
davec69:
Don't know if it helps, but I went through and tested forward voltage drop for all of the diodes in the area. Here's what I found:
D20 .483
D21 .514
D22 .674
D23 .552
D24 .694
D25 .543
D26 .523
MarshallJMP:
D26 is a zener diode of 15V and D24 is a zener diode of 6.2V so you should have those voltages over these.
Sparker:
Were these readings measured using the Vdc setting on the meter (with the amp fully powered) - not using the diode check function (diode symbol) with the amp power off?
Navigation
[0] Message Index
[*] Previous page
Go to full version