Fast dying sound

[Griphook]

Heyho Guys,


it's been a while since I last posted sth.


I did not use my Classic really much, because the MP2 fits better in our Band context.
Recently I gave my Home-MP1 to our second guitarist, so the Classic came back to live.


The problem now is:
I have to put OD1 and OD2 to 10.0 to get as near as the distortion of the MP-1 at OD1=3 and OD2=7. This is at Distortion-Voicing
At Brown Voicing I only get a little bit of crunch, even with both ODs set to 10.
The Clean Tube does not even crack up really on the same settings.


Also I found out, that the sound is dying pretty fast.


Maybe some of you experienced similar issues?

[Harley Hexxe]

Does it do this on the SS voicing too?

   If not, more than likely, you need some new bottles in it.

[MarshallJMP]

I think Harley is right, try some new tubes first.

[Griphook]

Thank you

I Got no New tubes, but Ich recently Got another MP-1, which sounds great btw.
So I just swapped the tubes of the MP-1 and the Classic. The the MP-1 still sounds great and theProblem still persists, but it Got better. It seems, that  the Noise Gate Kicks in, but it is turned off definetly.


I Dont  get A Sound off the Clean Tube Voicing with OD1 and 2 Set to about 6. The Sound I get, when it comes out, sounds more like A fart...


No obvious Problems with S.S.


Sorry about All the capital Letters . My Smartphone thinks, This is german :facepalm:

[Harley Hexxe]

It's beginning to sound more serious than just new tubes.

[Soloist]

Sorry about All the capital Letters . My Smartphone thinks, This is german :facepalm:

Hahahahhaahaha.... that's funny!

[Harley Hexxe]

Sorry about All the capital Letters . My Smartphone thinks, This is german :facepalm:

Hahahahhaahaha.... that's funny!

  I've hit the language button by accident many times sending texts too. It's still funny  :lol:

[MarshallJMP]

I'm starting to the think it's a bad R151 resistor.

Check this topic   http://adadepot.com/index.php?topic=1879.0

[Griphook]

Thanks, I will check that asap  ;)


The Video posted sounds exactly like mine..

[Griphook]

I got about 2000 reistors laying around, but 180kOhm ain't one...

Hope i get one in the next days. I hope 1/4W 5% Tolerance is okay?

[MarshallJMP]

1/4W 5% is okay but try to get a metal film, these are more resistant to high voltage then carbon resistors.

[Griphook]

Alright, thanks  :thumb-up:
I ordered A bunch of resistors, the should arrive on monday.


In the meantime I desoldered R151 and measured IT around 1,4 MOhms.  :facepalm:  just slightly more than 180k  :

[MarshallJMP]

Well seems you found the problem. :thumb-up:

[Griphook]

Works like a charm again.

Thank you!  :thumb-up:
Now I only have to get the 499k Ohms Resistor.