ADA Power Amps > B200s
Convert or change input voltage
vmaxvmax:
Hi,
Is it possible to rewire a USA model for EU voltages or is the tranny country specific?
Cheers and merry Christmas everybody!
rnolan:
B200s is an easy change but you need to change the transformer. There's room to mount a toroidal, you just need to buy one with the correct voltages. I'm pretty sure I posted about this ages ago when I did one. MJMP can tell you the voltages you need IIRC it was +30v -30v 6amp?? but it was a while ago. I found a perfect toroidal online. The toroidal mount with one bolt so you only have to drill a hole in the top cover and wire it up.
vmaxvmax:
Great, thank you.
MarshallJMP:
You need a transformer with two 30V, 4A windings.
vmaxvmax:
Thank you!
I had found one on eBay for $45 in the US but unfortunately the seller wouldn't export and in the end, it went for $45 to a single bidder...
Such is life!
I let my original B200 go to rust in a garden shed in the 80's after buying a Marshall 9100.
Navigation
[0] Message Index
[#] Next page
Go to full version