Since I don't see a Microtube 100 section (only the Microtube 200 section) I will write in here... maybe you guys should make a Microtube 100 section too.
Anyway I've had a Microtube 100 that I bought together with my MP-1 years ago. When I bought it it was all good, then one channel stoped working and a friend fixed it, then the other stoped working and my friend don't want to fix it because he says that they just will continue doing that. So for the last like 1-2 years I've been using another amp but I still miss the sound of the stereo chorus on my MP-1 and today I decided to give it a try not just for the stereo chorus but to try a wet/dry setup! I started with the W/D setup and I was liking it for like 15min but before I could do something else it stoped working
. Now here is the thing, I poped it open and notice that the 2 channel fuses where blown
I don't know if one blew off just because the light when off and the inverted came on or because I was experimenting with the INs and OUTs connections, so me questions are:
1) do the Microtube series needs to have something plugged din to its output like a valve amp or it doesn't like a SS amp?
2) if it needs to have something pluged in the outs how do I try different settings: do I need to turn off the channel volume first?
3) would a fuse blow when the light went off and the inverter turned on? btw the main fuse and the other fuse that is connected close to it are ok.
4) what would be the correct values for the fuses?