I find 60Hz way too low for guitar, good for bass but for me the low end freq is between 100-160Hz.
My setting of bass on the MP-1 is 6 to 9, I usually use 6 for band practice and live and 9 when I'm playing alone. The bass player has to fill the low end, not the guitar.
Just made a sim of the original vs your values, check it out. My guess is you will loose even more bass.Green is original red is your value.
Very good MJMP,
I have measured the resonant frequency of both of my speakers in my 2x12 cab, They both measure 75Hz.
I think I’ll use 75Hz as my target frequency and change R165 Bass Warp again to see how things go.
I am not using bode plotting software at the moment, just pencil to paper and a calculator.
@ my target of 75Hz and given the formula for fc = 1/(2πCR), rearranging for R, Ω,s, = R = 1/( 2πfC) = 21.22KΩ
I’ll change out the 10KΩ trimmer pot for a 22KΩ one if I can find one, or the nearest higher value and see how things go.
RE: “
My guess is you will loose even more bass” ? Why is that, may I ask ?
Thanks in advance.