ADA Depot - A Forum To Support Users of ADA Amplification Gear

FREE CLASSIFIED ADS => Buy & Sell ADA Gear => Topic started by: red2203stack on January 11, 2019, 12:33:57 PM

Title: WTB: MP1 Effects Return Jack
Post by: red2203stack on January 11, 2019, 12:33:57 PM

Looking for a replacement effects return jack for an MP1 in new or very good used condition. Anyone have one to spare?

Joe

Title: Re: WTB: MP1 Effects Return Jack
Post by: bunkyloo on January 11, 2019, 05:32:55 PM

Was just going to suggest MJMP website but it appears to be an obsolete part from what I can see. This may be a problem :facepalm:

Title: Re: WTB: MP1 Effects Return Jack
Post by: red2203stack on January 12, 2019, 06:05:50 AM

Yep, I emailed MJMP. No luck. He did give the part number. MJ-188LP-8 made by Pro Signal. Cany find one anywhere.

Title: Re: WTB: MP1 Effects Return Jack
Post by: bunkyloo on January 12, 2019, 07:12:43 AM

Looks like these guys may have it if its not a mistake. http://fr.components-mall.com/product/detail/pro-signal/mj-188lp-8.html   
Steve

Title: Re: WTB: MP1 Effects Return Jack
Post by: Kim on January 12, 2019, 10:41:13 AM

Another source to poke around in:

https://www.tubesandmore.com/products/jacks_plugs (https://www.tubesandmore.com/products/jacks_plugs)

There's some jacks in there that certainly look like the ones used in the MP-1, but you'd have to research the specs to make sure.    As another possible last resort... if the particular jack you need simply cannot be found, consider using a different jack that would still physically fit in the space needed and handwiring it to the board.   If there's a way you can do this, the MP-1 will not be "Stock" but will be functional.

Attached are pics of an example of an MP-1 getting different jacks than what it came with.   

Title: Re: WTB: MP1 Effects Return Jack
Post by: red2203stack on January 12, 2019, 05:03:08 PM

Steve, I think thats an old website. Emailed to confim availability and never got a reply.

Kim, I"ll try tubesandmore again. Looks like they had some of the other jacks but not the effexts return. The original one is 6 pin and still works but has been supper glued at the nut. I never use the effects loop anyways but was gonna try to fix it while under the hood for a cap job. 

Thanks for the replies,
Joe

Title: Re: WTB: MP1 Effects Return Jack
Post by: bunkyloo on January 12, 2019, 06:24:13 PM

Ok there is also studiosoundelectronics.com  I think there in Phoenix AZ. I am in southern California. Today I found a 9 pin that looks identical to that one look over all the jacks I believe its made by Jayco maybe same part different manufacturer. check it out I think its a winner I bought parts before from them.
Steve

Title: Re: WTB: MP1 Effects Return Jack
Post by: MarshallJMP on January 13, 2019, 08:25:29 AM

They (studiosoundelectronics.com  ) seem to have the return jack (JACK, 9-PIN Low Profile)

Title: Re: WTB: MP1 Effects Return Jack
Post by: red2203stack on January 14, 2019, 06:44:18 PM

Yea, looks like studiosoundelectronics has it. Thanks for the help.