Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Griphook]

COncerning the MIDI-Board:
Tried to put it back "in-Place". Very tough thing to to do. It seems to be a lot of tension.
Retried the Tests. Unfortunately without success.

[rnolan]

The only versions i saw were 1.36,1.37,1.38,2.00,2.01.

Then most likely it was from 1.36 to 1.38 that I did.

[MarshallJMP]

The 1.36 where one of the first units,so you have to have a really low serial nr?

[rnolan]

I'll get Mike to check the serial number, but I bought that unit as soon as it came to Australia, the guy who owned the store went to the NAM show where they were launched, saw them, and ordered some straight away and became the importer for ADA, so it is a very early unit.  He also saw the first Andersons at that NAM show and became the importer, my ProAm was the first in the country and one of the first Tom made after leaving Schecter.

[MarshallJMP]

Well it be yes,these are quite rare,i know Chucky also has an early version.

[rnolan]

Hey Mike, what the MP1s serial number ?

[MarshallJMP]

There's a white sticker with a nr starting with 8

[Griphook]

Just a note besides. My serial Number is: 814927

Is there any Key to "decrypt" the exact date, or a period?

[MarshallJMP]

No not really,it's all guessing.Ada made around 25-26000 pieces.

[rnolan]

Serial of Mikes MP1 is 803586

[MarshallJMP]

That's an early one but i doubt it's a 1.36 ,guess it was more like a 1.37?

[Griphook]

Hey Guys,

I didnt' forget about you.

I managed to get over my mates place to test with his MP1 v1.38 and what came out?

His MP1 switches faster, better and does only react to signals send on its own MIDI-Channel. CCs are passed through without any problems.
So my next step would be to give my MP1 away to you MJMP, like we said via PM.

I don't know what it is or how it comes but Im a bit frustrated about this because I could live with the extra work of Mapping but not with the wrong consideration of CCs which often screw up the current patch.

[MarshallJMP]

Well that's strange,did you change anything in your mp-1,like swapping the eprom?

[Griphook]

Nope, I didnt. If I had done it you would know 

But as I said, my Mates MP1 works pretty damn fine(even better sounding) and my still got the problems

[MarshallJMP]

So what did you actually do?Did you just try your pedal on his mp-1?