• Welcome to ADA Depot - A Forum To Support Users of ADA Amplification Gear.
 

News:

Let us never forget our beloved founder - RIP Jurrie, we all miss you very much

Main Menu

MP-1 does not change Presets correctly

Started by Griphook, January 12, 2016, 12:31:51 PM

Previous topic - Next topic

Griphook

COncerning the MIDI-Board:
Tried to put it back "in-Place". Very tough thing to to do. It seems to be a lot of tension.
Retried the Tests. Unfortunately without success.

rnolan

Quote from: MarshallJMP on February 01, 2016, 11:04:49 AM
The only versions i saw were 1.36,1.37,1.38,2.00,2.01.
Then most likely it was from 1.36 to 1.38 that I did.
Studio Rig: Stuff; Live Rig: More Stuff; Guitars: A few

MarshallJMP

The 1.36 where one of the first units,so you have to have a really low serial nr?

rnolan

I'll get Mike to check the serial number, but I bought that unit as soon as it came to Australia, the guy who owned the store went to the NAM show where they were launched, saw them, and ordered some straight away and became the importer for ADA, so it is a very early unit.  He also saw the first Andersons at that NAM show and became the importer, my ProAm was the first in the country and one of the first Tom made after leaving Schecter.
Studio Rig: Stuff; Live Rig: More Stuff; Guitars: A few

MarshallJMP

Well it be yes,these are quite rare,i know Chucky also has an early version.

rnolan

Studio Rig: Stuff; Live Rig: More Stuff; Guitars: A few

MarshallJMP

There's a white sticker with a nr starting with 8

Griphook

Just a note besides. My serial Number is: 814927

Is there any Key to "decrypt" the exact date, or a period?

MarshallJMP

No not really,it's all guessing.Ada made around 25-26000 pieces.

rnolan

Studio Rig: Stuff; Live Rig: More Stuff; Guitars: A few

MarshallJMP

That's an early one but i doubt it's a 1.36 ,guess it was more like a 1.37?

Griphook

Hey Guys,

I didnt' forget about you.

I managed to get over my mates place to test with his MP1 v1.38 and what came out?

His MP1 switches faster, better and does only react to signals send on its own MIDI-Channel. CCs are passed through without any problems.
So my next step would be to give my MP1 away to you MJMP, like we said via PM.

I don't know what it is or how it comes but Im a bit frustrated about this because I could live with the extra work of Mapping but not with the wrong consideration of CCs which often screw up the current patch.

MarshallJMP

Well that's strange,did you change anything in your mp-1,like swapping the eprom?

Griphook

Nope, I didnt. If I had done it you would know  :thumb-up: :)

But as I said, my Mates MP1 works pretty damn fine(even better sounding) and my still got the problems

MarshallJMP

So what did you actually do?Did you just try your pedal on his mp-1?