ADA Depot - A Forum To Support Users of ADA Amplification Gear
ADA Preamps => MP-2 => Topic started by: rickeb1 on May 21, 2016, 01:28:13 PM
-
I'd like to reorganize my presets, so that they are in a different order (ex. move current preset #1 to be #3, etc.). The only way I can see to do it is to edit a preset, change some/any parameter, than save it in a different location when prompted. This seems tedious, and I don't want to change any parameters, just move them to a different location. Is there an easier way to do this?
-
See page 28 of the user manual for copying to other slots.
You can download the manual from the MP2 page .
-
I totally missed that, thanks very much! :)
-
:thumb-up: :thumb-up: :thumb-up:
-
Oops, I spoke too soon. To copy presets, the manual says to start by pressing the ">" button twice, until the display shows, "COPY SINGLE PROGRAMS?". But, this does not happen on my MP-2 when I press the ">" button. No matter how many times I press it, I see the message, "USE BANK UP/DN, 0-9, etc.". This is with version 1.41. Maybe the process changed with the newer eprom?
-
I'll have to defer to the MP2 gurus on here for that. I just happened to have the manual open when I saw your post. I haven't done too much with mine yet. I'm sure Dante or Kim will have the answer for you.
-
The page 28 talks about copying single presets to user slots.I think you want to copy user to user right?
-
Oops, I spoke too soon. To copy presets, the manual says to start by pressing the ">" button twice, until the display shows, "COPY SINGLE PROGRAMS?". But, this does not happen on my MP-2 when I press the ">" button. No matter how many times I press it, I see the message, "USE BANK UP/DN, 0-9, etc.".
The unit needs to be in an Edit mode before starting the editing process. :thumb-up:
-
Thanks Kim, you beat me to it.
I have done this before, tried to edit the unit before it's in EDIT mode. Common mistake
-
Ah, got it. I'll try it again tonight. Thanks very much!