ADA Preamps > MP-2

MP2 sound drop out

(1/2) > >>

Soloist:
My Mp2 sound keeps cutting out, kinda like a stutter.
No power loss only sound. Full volume one second and the next nothing, then back in. Its constant and doesn't matter if any effects or noise gate is on or off. Any ideas?

Kim:
Have you completely eliminated the guitar and the input cable from being the problem?
I had this problem earlier this year but it was actually the instrument cable that went to  :poop:

Soloist:
Hey there Kim, yeah it doesnt matter which guitar I use, and I swapped out all the cables. Still no luck.

Dante:
Try wiggling every frickin cord in or out of it. I had a bad output jack that simply needed to be remelted. I tried three cords before I figgered out it was the jack  :facepalm:

vansinn:
The front input jack features a switch for disabling the rear jack input; the switch could be corroded.
Try both front and rear jacks to see if the problem is constant.

The push-push mini switches on the rear, for setting inst/line levels, and the speaker emu switch, are known to become corroded with time; try pushing them in/out a good number of time. Contact cleaner can sometime cure them, else replace.

Also, the noise gate is known to develop some chatter. There's a fix (noise mod) for it.

Navigation

[0] Message Index

[#] Next page