ADA Depot - A Forum To Support Users of ADA Amplification Gear

Non ADA Gear => Rack Gear => Topic started by: rabidgerry on February 21, 2018, 02:56:03 AM

Title: Repair Butterfly Catch
Post by: rabidgerry on February 21, 2018, 02:56:03 AM
Hi guy's, I need to repair a butterfly Catch on a a 3u rack case of mine, does anyone have any idea how I got about doing this?

I've no clue where to get spares or how to fit them.

Any advice would be appreciated as always.
Title: Re: Repair Butterfly Catch
Post by: MarshallJMP on February 21, 2018, 03:29:06 AM
Do you mean a butterfly latch?
Title: Re: Repair Butterfly Catch
Post by: tomy on February 21, 2018, 06:22:09 AM
Hi gerry,

Do you have a pic ?

tg
Title: Re: Repair Butterfly Catch
Post by: Soloist on February 21, 2018, 06:34:09 AM
Hey Gerry, you can buy new ones off amazon. Singles or pairs. Black or chrome depending on which style you have.
Looks like $15 U.S. for a pair.
I went to amazon.com and typed in rack case latches.
Title: Re: Repair Butterfly Catch
Post by: rabidgerry on February 21, 2018, 07:31:18 AM
Do you mean a butterfly latch?

Yes that's what I mean, some places call it latch, catch, or lock.

I just called it catch as it seemed to bring up more results.

Thanks guys for suggestions.

I got a spare one in my sights

https://www.thomann.de/gb/adam_hall_17370c_butterfly.htm (https://www.thomann.de/gb/adam_hall_17370c_butterfly.htm)

How the hell do I get the old one off and install the new one?  Noticed the holes  don't match with the one currently on the case that needs to come off.
Title: Re: Repair Butterfly Catch
Post by: rnolan on February 21, 2018, 09:32:16 PM
Hey RG, depends how they are attached, on my SKB they are riveted so you need to drill out the old rivets and use a rivet gun/tool to install a new one.  If you want a good clean job done, I'd take it to someone who makes road cases as they'll have all the right tools etc.  Best if you can repair the current one or source the same latch or there will no doubt be issues with how it fits (or doesn't  :facepalm: ), there are many variations...
Title: Re: Repair Butterfly Catch
Post by: rabidgerry on February 22, 2018, 01:09:40 AM
This is my case here.  It's rivets from what I understand.  They wont match up with the old holes from what I can see.  A rivet gun?  Jeez didn't even know what that was until you mentioned it and I checked on line for it!

This might be a bit more hassle than I anticipated  :facepalm:
Title: Re: Repair Butterfly Catch
Post by: rnolan on February 22, 2018, 06:59:11 AM
Which is why I suggested someone who builds rack cases  :dunno: , at least worth asking the question (how much to fix ?), hopefully it's cheaper than buying a new rack, another option, not my favourite choice but depends on the economics...
Title: Re: Repair Butterfly Catch
Post by: MikeB on February 22, 2018, 11:53:49 AM
Just a thought...  :facepalm:
Title: Re: Repair Butterfly Catch
Post by: MarshallJMP on February 22, 2018, 01:45:17 PM
Hahaha  :thumb-up:
Title: Re: Repair Butterfly Catch
Post by: vansinn on February 23, 2018, 11:01:22 AM
A handheld rivet tool is quite inexpensive; often comes with small bags of the most usual rivets.
Yeah, just drill out the old rivets, fit the new latch part to catch, drill new holes, attach the latch, rivet, and latch the catch ;)
Title: Re: Repair Butterfly Catch
Post by: rabidgerry on February 26, 2018, 03:14:41 AM
A handheld rivet tool is quite inexpensive; often comes with small bags of the most usual rivets.
Yeah, just drill out the old rivets, fit the new latch part to catch, drill new holes, attach the latch, rivet, and latch the catch ;)

Yeah I didn't realise until I looked into it!  Literally £5.99 gets me the tool and rivets, and this video explaining what Richard suggested basically steps me through what I need to do.  I'll order the latch this week and the tool and get riveting.  Hopefully my drill can drill out the old latch.

http://www.youtube.com/watch?v=b0DKW0z1lp0

and
http://www.youtube.com/watch?v=WPwNsQMnx88