ADA Depot Too - A Forum To Support Users of ADA Amplification Gear

Please login or register.

Login with username, password and session length
Advanced search  

News:

Board added for "ADA Cab Sims" in Other ADA Gear (coz El asked for it LOL)

Pages: [1] 2   Go Down

Author Topic: Changing The Battery  (Read 1571 times)

0 Members and 1 Guest are viewing this topic.

VoxG2

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 94
    • View Profile
Changing The Battery
« on: Time Format »

     Hello gang, always a pleasure to converse here. Is there anywhere I can see a demo on how to change the original battery? I don't want to do the mod, just change the battery. Thanks.
Logged

rnolan

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4358
    • View Profile
Re: Changing The Battery
« Reply #1 on: Time Format »

There's quite a few post about it (not sure about a video  :dunno: ).  It's actually easier to do the mod (install CR2032 battery holder/receptacle) as you can buy the holder and a battery for less than $10 from most electrical shops.  It's harder to source a 3v lithium battery with the solder lugs/legs attached in the right place.
Logged
Studio Rig: MP2/MB1 > Eurorack UB2442FX-Pro > TC M-One XL > Behringer Truths (with Truth Sub) / QUAD ESL 63s
Live Rig: MP2/MB1 > Alesis Quadverb > Alesis Midiverb 4 > Yamaha AM802 > B200s/Carvin TS100/DCM200L > ADA Split Stacks/Mesa P112s

Kim

  • Bringer of Doom
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 593
  • Circle in the night, a fire within.
    • View Profile
    • Ov Moros
Re: Changing The Battery
« Reply #2 on: Time Format »

Changing the battery requires a basic knowledge of desoldering/soldering....easy stuff.  After sourcing the correct stock battery type (with lugs attached) it's a simple procedure of unsoldering the old battery and removing it to installing the new battery and resoldering it in place.  Great care must be taken to make sure the polarity is correct; the motherboard has a "+" labelled on it to help. 

While I completely understand and respect that it's your MP-1 and you can do with it how you see fit, it still begs the question: Why not just do the actual Battery Mod?  It's the exact same difficulty (hardly any at all if you're experienced with a soldering iron) with the benefits of never having to unsolder the battery itself ever again, and to also use the easier-to-find coin battery without solder lugs like Richard said. 

As for a video...somebody might have one out there somewhere.  :dunno:   I didn't make a video, but I did create the Battery Mod for the MP-1 and the writeup instructions will also apply to replacing your old battery with a new soldered-in battery.  Follow the instructions up to the point of installing a battery receptacle, and just install the lugged battery instead while making sure the polarity is correct.
Logged
RIG OF FIRE:  ADA MP-2, Rocktron Xpression, Peavey Classic 60/60, Gator GPB-BAK-1 pedalboard, Korg DTR1000, Rolls MidiBuddy, Morley Tremonti wah, Saturnworks buffered splitter.
Mellotron/organ section:  EHX Mel9, EHX C9, EHX Soul Food, Boss LS-2, Morley Volume, Crate Powerblock.
Pair of 4x12 cabs:  each custom wired for both 2x12 guitar and 2x12 Mel9. UPDATED DIAGRAMS
HOME/STUDIO/COMBOS/STUFF:  ADA Quad Tube 150m, Crate G60XL, Saturnworks Saturn Fuzz, Boss CS-3.
GUITARS:  Jackson KE3-DiMarzio Breed/PAF Pro, Jackson KE3-DiMarzio Breed/PAF Pro, Silvertone P-bass, '70s Gretsch Dorado acoustic.

Iperfungus

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 511
  • Methodical killers do good jobs!
    • View Profile
Re: Changing The Battery
« Reply #3 on: Time Format »


 but I did create the Battery Mod for the MP-1 and the writeup instructions will also apply to replacing your old battery with a new soldered-in battery.  Follow the instructions up to the point of installing a battery receptacle, and just install the lugged battery instead while making sure the polarity is correct.

 :bow: :bow: :bow: :bow: :bow:
Thanks a lot for that mod!!!  :thumb-up:

http://adadepot.com/mods/ADA_MP-1_Battery_Mod.pdf
Logged
On the run again!

ADA MP-1 (modified by MJMP)
Marshall JMP1
TC Electronic G Major
Alesis Quadraverb GT
Zoom 9150
Advance Tube Technologies TA '70 tube power amp
Marshall Valvestate 8008 power amp
ADA B200s power amp
Behringer FCB1010 MIDI controller
Zoom 8050 MIDI Controller
Zoom FP01 Expression pedal
Blackstar HTV 212 stereo cabinet with 70/80 Celestion speakers
Rivera Pubster 25
Blackstar Fly 3 amp + external speaker

Stomps, stomps, stomps...and stomps (Bogner rules!): TC Helix phaser, Xotic RC Booster, TC Sentry noise gate, Bogner Ecstasy Blue, Bogner Ecstasy Red, Mad Professor Royal Blue Overdrive, Sonic Research Turbo Tuner, TC Flashback delay


1987 PRS Custom
1988 Fender Strat Plus
2014 Fender Modern Player Strat
2016 Custom assembled Fender Strat
2013 Gibson SG Standard
1995 Gibson Les Paul Studio
1991 MIJ Ibanez RG570FM TB
2016 MIJ Ibanez RG655M SPM
2002 Bruno Traverso Custom "Tommy" Silky
2017 Kramer Baretta Special
2010 Simon & Patrick Woodland CW acoustic

VoxG2

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 94
    • View Profile
Re: Changing The Battery
« Reply #4 on: Time Format »

   Ok...I'm convinced. I'm doing the mod. Thanks!!
Logged

Kim

  • Bringer of Doom
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 593
  • Circle in the night, a fire within.
    • View Profile
    • Ov Moros
Re: Changing The Battery
« Reply #5 on: Time Format »

You're welcome.   However, IIRC the part numbers listed in that doc were not correct.  There was a typo between the write-up (which I did) and the actual rendering to the Adobe format (which someone else did for me). 

 EDIT:  just looked up those part numbers and they appear to be indeed correct.  Sorry for the confusion!

Marshalljmp might have updated part numbers, though.   :thumb-up:
« Last Edit: Time Format by Kim »
Logged
RIG OF FIRE:  ADA MP-2, Rocktron Xpression, Peavey Classic 60/60, Gator GPB-BAK-1 pedalboard, Korg DTR1000, Rolls MidiBuddy, Morley Tremonti wah, Saturnworks buffered splitter.
Mellotron/organ section:  EHX Mel9, EHX C9, EHX Soul Food, Boss LS-2, Morley Volume, Crate Powerblock.
Pair of 4x12 cabs:  each custom wired for both 2x12 guitar and 2x12 Mel9. UPDATED DIAGRAMS
HOME/STUDIO/COMBOS/STUFF:  ADA Quad Tube 150m, Crate G60XL, Saturnworks Saturn Fuzz, Boss CS-3.
GUITARS:  Jackson KE3-DiMarzio Breed/PAF Pro, Jackson KE3-DiMarzio Breed/PAF Pro, Silvertone P-bass, '70s Gretsch Dorado acoustic.

Iperfungus

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 511
  • Methodical killers do good jobs!
    • View Profile
Re: Changing The Battery
« Reply #6 on: Time Format »

Marshalljmp might have updated part numbers, though.   :thumb-up:

And battery mod kits as well!  :thumb-up:
Logged
On the run again!

ADA MP-1 (modified by MJMP)
Marshall JMP1
TC Electronic G Major
Alesis Quadraverb GT
Zoom 9150
Advance Tube Technologies TA '70 tube power amp
Marshall Valvestate 8008 power amp
ADA B200s power amp
Behringer FCB1010 MIDI controller
Zoom 8050 MIDI Controller
Zoom FP01 Expression pedal
Blackstar HTV 212 stereo cabinet with 70/80 Celestion speakers
Rivera Pubster 25
Blackstar Fly 3 amp + external speaker

Stomps, stomps, stomps...and stomps (Bogner rules!): TC Helix phaser, Xotic RC Booster, TC Sentry noise gate, Bogner Ecstasy Blue, Bogner Ecstasy Red, Mad Professor Royal Blue Overdrive, Sonic Research Turbo Tuner, TC Flashback delay


1987 PRS Custom
1988 Fender Strat Plus
2014 Fender Modern Player Strat
2016 Custom assembled Fender Strat
2013 Gibson SG Standard
1995 Gibson Les Paul Studio
1991 MIJ Ibanez RG570FM TB
2016 MIJ Ibanez RG655M SPM
2002 Bruno Traverso Custom "Tommy" Silky
2017 Kramer Baretta Special
2010 Simon & Patrick Woodland CW acoustic

VoxG2

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 94
    • View Profile
Re: Changing The Battery
« Reply #7 on: Time Format »

  Oh so he has the two pieces in stock and ready to sell?
Logged

MarshallJMP

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3442
    • View Profile
    • marshalljmpmodshop.net
Re: Changing The Battery
« Reply #8 on: Time Format »

Yes if you want I have them.
Logged

rnolan

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4358
    • View Profile
Re: Changing The Battery
« Reply #9 on: Time Format »

One reason (IMHO) it's worth getting from MJMP is you KNOW the solder lugs on the battery holder will fit perfectly. Not that this isn't a relatively standard part, just takes out any ambiguity...

Actually, while the de-soldering/soldering effort is the same whether you use a battery with the right lugs attached or the battery holder, soldering in the holder ensures the battery is never heated at all (as it will be a bit when soldering in the battery with attached lugs (some heat will transfer into the battery, how much depends on your soldering skills)
Logged
Studio Rig: MP2/MB1 > Eurorack UB2442FX-Pro > TC M-One XL > Behringer Truths (with Truth Sub) / QUAD ESL 63s
Live Rig: MP2/MB1 > Alesis Quadverb > Alesis Midiverb 4 > Yamaha AM802 > B200s/Carvin TS100/DCM200L > ADA Split Stacks/Mesa P112s

VoxG2

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 94
    • View Profile
Re: Changing The Battery
« Reply #10 on: Time Format »

   Yes thank you! I do plan on getting them from you, JMP.
Logged

Syntho

  • Newbie
  • *
  • Offline Offline
  • Posts: 17
    • View Profile
Re: Changing The Battery
« Reply #11 on: Time Format »

Is there a certain pin arrangement that I should be looking out for? I remember changing a battery in a synthesizer and the battery pins were placed weird so it took me longer to source the one I needed.

There are tons of 2032 battery holders on Ebay but not sure which one will fit my MP-1.
Logged

rnolan

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4358
    • View Profile
Re: Changing The Battery
« Reply #12 on: Time Format »

You need the flat (parallel to PCB) style for MP1, (MP2 is vertical), and the pins need to be the right spacing to align with the holes in the PCB, IIRC there are links in the MP1 battery post to suitable holders  :dunno:
Logged
Studio Rig: MP2/MB1 > Eurorack UB2442FX-Pro > TC M-One XL > Behringer Truths (with Truth Sub) / QUAD ESL 63s
Live Rig: MP2/MB1 > Alesis Quadverb > Alesis Midiverb 4 > Yamaha AM802 > B200s/Carvin TS100/DCM200L > ADA Split Stacks/Mesa P112s

Syntho

  • Newbie
  • *
  • Offline Offline
  • Posts: 17
    • View Profile
Re: Changing The Battery
« Reply #13 on: Time Format »

Where's the post?
Logged

rnolan

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4358
    • View Profile
Re: Changing The Battery
« Reply #14 on: Time Format »

I thought there were a few posts about it, I may be wrong.  MJMP has them if you want to get it from him.
Logged
Studio Rig: MP2/MB1 > Eurorack UB2442FX-Pro > TC M-One XL > Behringer Truths (with Truth Sub) / QUAD ESL 63s
Live Rig: MP2/MB1 > Alesis Quadverb > Alesis Midiverb 4 > Yamaha AM802 > B200s/Carvin TS100/DCM200L > ADA Split Stacks/Mesa P112s
Pages: [1] 2   Go Up