ADA Depot Too - A Forum To Support Users of ADA Amplification Gear

Please login or register.

Login with username, password and session length
Advanced search  

News:

Board added for "Routing & Patching" in Lets Get Technical

Pages: [1]   Go Down

Author Topic: B200B Replacement Fan Options???...  (Read 2469 times)

0 Members and 1 Guest are viewing this topic.

BoWeevil

  • Newbie
  • *
  • Offline Offline
  • Posts: 13
  • It's not the age, it's the mileage,.....
    • View Profile
B200B Replacement Fan Options???...
« on: Time Format »

Hey All,
Just picked up my second MB-1 and the matching B500B from the original owner!
Pretty stoked, but the fan on the 500B is really loud!
I took the fan out and gave it good cleaning, but the noise still remains.
I started poking around on eBay, but this particular model doesn't seem to want to show up in my searches.
I have attached a pic of the specific model, but its an IMC PEWEE BOXER, Model # 3115FS 12T B20, 115V.
Looking forward to any and all suggestions on a decent replacement.
Thanks!
Logged
BoWeevil
boweevil@whoisbo.com

rnolan

  • Administrator
  • Superhero Member
  • ******
  • Offline Offline
  • Posts: 4668
    • View Profile
Re: B200B Replacement Fan Options???...
« Reply #1 on: Time Format »

Hey BoWeevil, I didn't know any ADA gear had fans in them ?? But B500s' are not as common...and it would make sense as the B200s's gets very warm..
I assume you could go for an equivalent fan, MJMP or Sparker may have better suggestions ?
Logged
Studio Rig: MP2/MB1 > Eurorack UB2442FX-Pro > TC M-One XL > Behringer Truths (with Truth Sub) / QUAD ESL 63s
Live Rig: MP2/MB1 > Alesis Quadverb > Alesis Midiverb 4 > Yamaha AM802 > B200s/Carvin TS100/DCM200L > ADA Split Stacks/Mesa P112s

Sparker

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 98
    • View Profile
Re: B200B Replacement Fan Options???...
« Reply #2 on: Time Format »

Did you try spraying any WD-40 (or equivalent) into the bearings + shaft? Might do the trick (use the long thin tube to get right inside).
Logged
ADA Gear: MP-1 Tube Board

rnolan

  • Administrator
  • Superhero Member
  • ******
  • Offline Offline
  • Posts: 4668
    • View Profile
Re: B200B Replacement Fan Options???...
« Reply #3 on: Time Format »

Or you could also try some Teflon like they sell for pushbike wheel hubs/chains ?
Logged
Studio Rig: MP2/MB1 > Eurorack UB2442FX-Pro > TC M-One XL > Behringer Truths (with Truth Sub) / QUAD ESL 63s
Live Rig: MP2/MB1 > Alesis Quadverb > Alesis Midiverb 4 > Yamaha AM802 > B200s/Carvin TS100/DCM200L > ADA Split Stacks/Mesa P112s
Pages: [1]   Go Up