Let's Get Technical > All PREAMP Tech Tips & Support

Making Bugera 6262 to slave my Ada Mp2 And Gmajor2

<< < (3/3)

rnolan:
The Fender is designed to take a guitar input not a preamp output (MP2/Gmaj etc).  So for a start the fender is expecting a guitar level signal (milli volts) and you are feeding it preamp out levels (volts). Ideally you'd plug into its poweramp and bypass it's preamp, but if you can't then you need to adjust it's inputs as far as you can to suit ie turn gain/input way down and try to make the eq as flat as possible.  But if ampulator makes it work go with that, it's important that you run the rig in stereo, sounds soo much better.

Hanneman213:
Our live show is done. Here's the report, Due to my keyboard side duty, I had to take the suitable place on stage where I needed to use Marshall MG 100 Head. and I sent my signal from TC Gmajor to FX Return of MG. The Cleans where beautiful but crunches were totally MG. Personally I disappointed from my direct sound coming after me. The tech guy adjusted it from the PA for internal Speakers of the Bar, My Friends from audience said it was ok.
But Next Time I will carry my Rocktrone Velocity and just plug into 4x12 Marshall cab.

Soloist:
I am curious as to why you did your signal chain the way you did. G major into mg's fx return would be using the G major as a preamp,  bypassing the mg's pre. Sure cleans will sound good but nothing with any crunch will. Why not put the g major completely in the mg's loop? Or did I miss something?

Hanneman213:
Hello Soloist. It's all about carrying my heavy gear to venue. Because The venue is placed on a boulevard which you can not reach with your car. I have an ESP standart V (Randy Rhoads style) with its own specific heavy hard case (I afraid to keep it in a soft pack) A Korg Synthesizer Keyboard, and my 4 unit Rack case includes ADA MP2+Gmajor+Ampulator+ Rocktron Velocity. The main weight is in Rocktrone. So I didn't want to carry it like a cross-fit session. ADA and Gmajor ensures me to press less step on my footswitcher, Clean/crunch/lead all programmed into 3 banks. According to our play list (Queenryche,Iron Maiden, Whitesnake,etc) I have to be quick as possible as when switching between banks and I can't use any other switcher.

Navigation

[0] Message Index

[*] Previous page