ADA Preamps > Original MP-1

ADA MP1 Rack Cover/Lid Replacement

(1/5) > >>

bognerfish:
Hi, the rack cover/lid on my ADA-MP1 is badly scratched, does anyone know where you can buy a new?

Thanks,
Gerry.

rnolan:
MJMP may have a spare ?, or you could get a sheet metal guy to clone you one, it's just a piece of flat steel sheet with appropriate holes drilled in it and IIRC the bottom and top covers are identical (well at least in MP2 they are) so just copy either the top or bottom.  Alternately just sand the scratches out and spray it with some metal paint, or get it powder coated  :dunno:

MarshallJMP:
Nope no spares left.

bognerfish:
Thanks for the info guys, unfortunately the lid is badly dented and needs replaced- so if anyone has an old ADA MP1 that has died or for parts just let me know...

Iperfungus:
I have one...it's not completely dead but it's old (original V1.38) and it has many issues.


To be honest, MJMP asked me about that ADA...so, if he's interested...let's see.
Probably it could be 100% repaired and restored, if one knows how to do the job.

Where are you from, in the meanwhile?

Navigation

[0] Message Index

[#] Next page