ADA Depot Too - A Forum To Support Users of ADA Amplification Gear

Please login or register.

Login with username, password and session length
Advanced search  

News:

Lets get Technical > All Things Tube All about preamp and power amp Tubes.

Pages: 1 2 [3] 4 5 ... 10
 21 
 on: Time Format 
Started by Chucky - Last post by Chucky
Here's another snippet of an original...
DualKlonz amp.
Fun.

 22 
 on: Time Format 
Started by Dante - Last post by Kim
That reference was mostly for the chip replacement info should you require it I guess.   

But last night I just went through and cleaned every single jack, switching contact, and pot in my entire guitar chain (MP-2, Intellifex, Classic 60/60) chasing exactly what you've described.  Success!   No more volumes spikes and no more static.   :whoohoo!:

Again, E.S.F.   Check the Easy Stuff First.   :thumb-up:

 23 
 on: Time Format 
Started by red2203stack - Last post by MarshallJMP
They (studiosoundelectronics.com  ) seem to have the return jack (JACK, 9-PIN Low Profile)

 24 
 on: Time Format 
Started by red2203stack - Last post by bunkyloo
Ok there is also studiosoundelectronics.com  I think there in Phoenix AZ. I am in southern California. Today I found a 9 pin that looks identical to that one look over all the jacks I believe its made by Jayco maybe same part different manufacturer. check it out I think its a winner I bought parts before from them.
Steve

 25 
 on: Time Format 
Started by Dante - Last post by Dante
I read that already...but I didn't know if what I have is a 'burp'

 26 
 on: Time Format 
Started by red2203stack - Last post by red2203stack
Steve, I think thats an old website. Emailed to confim availability and never got a reply.

Kim, I"ll try tubesandmore again. Looks like they had some of the other jacks but not the effexts return. The original one is 6 pin and still works but has been supper glued at the nut. I never use the effects loop anyways but was gonna try to fix it while under the hood for a cap job. 

Thanks for the replies,
Joe

 27 
 on: Time Format 
Started by Dante - Last post by Kim
And then there's this tidbit of info:

My MT200 freaks out

 28 
 on: Time Format 
Started by Dante - Last post by Kim
As it turns out, I too need to do a complete shakedown of my rig for a very similar problem.    :facepalm:

But since you've already narrowed the problem to the MT200, I'd suggest a good cleaning of every pot and jack in it first.   If there are switching type jacks, make sure to clean those switching contacts as well.   Always hit the Easy Stuff first....   :)

 29 
 on: Time Format 
Started by red2203stack - Last post by Kim
Another source to poke around in:

https://www.tubesandmore.com/products/jacks_plugs

There's some jacks in there that certainly look like the ones used in the MP-1, but you'd have to research the specs to make sure.    As another possible last resort... if the particular jack you need simply cannot be found, consider using a different jack that would still physically fit in the space needed and handwiring it to the board.   If there's a way you can do this, the MP-1 will not be "Stock" but will be functional.

Attached are pics of an example of an MP-1 getting different jacks than what it came with.   

 30 
 on: Time Format 
Started by Dante - Last post by Dante
Hi Guys,

I though I was having trouble with my MP-2, or a bad cable, but it turned out to be my MT-200. I was using the bridged mono jacks, practicing at home (thankfully) and the volume would jump up occasionally. Little spurts of extra volume. It was strange. It could also have been that I was playing with it in a 'messed up' state and those volume jumps were the actual normal volume.  :dunno:

Anyway, I switched to using Channel A with a smaller speaker cab and all was well....until now. It seems the cancer has spread to channel A now, and channel B. Shit.

I'm gonna yank it outta my rack today, what should I check first?

Pages: 1 2 [3] 4 5 ... 10