ADA Depot - A Forum To Support Users of ADA Amplification Gear

ADA Preamps => MP-2 => Topic started by: rickeb1 on May 21, 2016, 01:28:13 PM

Title: Moving presets around
Post by: rickeb1 on May 21, 2016, 01:28:13 PM

I'd like to reorganize my presets, so that they are in a different order (ex. move current preset #1 to be #3, etc.).  The only way I can see to do it is to edit a preset, change some/any parameter, than save it in a different location when prompted.  This seems tedious, and I don't want to change any parameters, just move them to a different location.  Is there an easier way to do this?

Title: Re: Moving presets around
Post by: Samuraipanda on May 21, 2016, 03:36:34 PM

See page 28 of the user manual for copying to other slots.
You can download the manual from the MP2 page .

Title: Re: Moving presets around
Post by: rickeb1 on May 21, 2016, 07:14:10 PM

I totally missed that, thanks very much!  :)

Title: Re: Moving presets around
Post by: Samuraipanda on May 22, 2016, 10:47:54 AM

 :thumb-up: :thumb-up: :thumb-up:

Title: Re: Moving presets around
Post by: rickeb1 on May 22, 2016, 04:13:17 PM

Oops, I spoke too soon.  To copy presets, the manual says to start by pressing the ">" button twice, until the display shows, "COPY SINGLE PROGRAMS?".  But, this does not happen on my MP-2 when I press the ">" button.  No matter how many times I press it, I see the message, "USE BANK UP/DN, 0-9, etc.".  This is with version 1.41.  Maybe the process changed with the newer eprom?

Title: Re: Moving presets around
Post by: Samuraipanda on May 22, 2016, 04:24:42 PM

I'll have to defer to the MP2 gurus on here for that. I just happened to have the manual open when I saw your post. I haven't done too much with mine yet. I'm sure Dante or Kim will have the answer for you.

Title: Re: Moving presets around
Post by: MarshallJMP on May 22, 2016, 06:57:46 PM

The page 28 talks about copying single presets to user slots.I think you want to copy user to user right?

Title: Re: Moving presets around
Post by: Kim on May 23, 2016, 02:59:51 AM

Quote from: rickeb1 on May 22, 2016, 04:13:17 PM

Oops, I spoke too soon.  To copy presets, the manual says to start by pressing the ">" button twice, until the display shows, "COPY SINGLE PROGRAMS?".  But, this does not happen on my MP-2 when I press the ">" button.  No matter how many times I press it, I see the message, "USE BANK UP/DN, 0-9, etc.". 

The unit needs to be in an Edit mode before starting the editing process.   :thumb-up: 

Title: Re: Moving presets around
Post by: Dante on May 23, 2016, 06:27:41 AM

Thanks Kim, you beat me to it.

I have done this before, tried to edit the unit before it's in EDIT mode. Common mistake

Title: Re: Moving presets around
Post by: rickeb1 on May 23, 2016, 07:08:10 AM

Ah, got it.  I'll try it again tonight.  Thanks very much!