Miscellaneous > Introduce Yourself

Hi. I'm the new guy...

<< < (3/3)

rnolan:
Hey hg, all normal  :thumb-up: , when you change various things it can throw up errors on the first boot, the control side of a MP1 is a computer which controls some of the analogue circuits and switching etc.  When you change out the battery, any saved patches are lost (as they are stored in RAM which needs power from the battery, or the unit when its on) and also triggers a full error check (my guess).  You can load/restore the factory presets (they are stored on the v2.01 EPROM), you cab access them directly or load them into presets.
Anyway, if it's working, all is good.  If you haven't read the manual for a while, read it now  :thumb-up: , somethings you will already know, but others eg play modes... you may not have thought of before  :dunno:

MarshallJMP:
When you replace the battery it will count from C1 to C128 and then you get err1,2,3 and all the presets are gone. So yes that's normal, no worries  ;D

To reload the factory presets just push STORE, it will blink and the BANK and 1 together. It will say "presets loaded".

Navigation

[0] Message Index

[*] Previous page