ADA Preamps > MB-1

Midi CC control of MB1

<< < (5/5)

Peter H. Boer:
Any CC pedal would do.
I use(d) Roland EV-5

rnolan:
When you plug in a CCP into the MXC pedal jack the first time you should set the range (http://adadepot.com/index.php?topic=2172.msg24798;topicseen#msg24798).Also when you use a CCP with the MB-1 (and for CC control the MB-1 needs to have the last/latest EPROM v2.05 (get one here if you haven't got that version http://www.marshalljmpmodshop.net/miscellaneous_parts_and_replacement_tubes.htm), you have to sweep past the current setting for that parameter in the given patch to activate/grab it eg if you are controlling master vol and it's set at 6 in the patch, you need to sweep up to and slightly past 6 on the pedal for it to start to work.
EPROM version is displayed during startup.  When I was doing this I used the global master which just had to be "grabbed" on startup, then it worked across all patches, other patch parameters need to be "grabbed" on a patch by patch basis.

Navigation

[0] Message Index

[*] Previous page