Let's Get Technical > Power Amp Tech

ADA Microtube - "protect" problem

(1/4) > >>

omivai:
Hi everyone, i have an ADA Microtube that goes into protection mode for several minutes, then powers up , and sometimes not.

Does anyone here have an idea on what could be the issue?

THANKS!

Dante:
Hi Omivai, Welcome to the Depot!

I don't know which Microtube you're using, but my MT200 does take a bit to fire up sometimes. Other times, it's like 5 seconds and BAM, it's on. There were many discussions on the old forum about how to rectify the issue, I'm sure a tech-oriented member will chime in with suggestions.

Be patient, the forum is still pretty new - it's still all shiny and smells kinda funny. Gotta break it in a bit

omivai:
Thanks Dante, mine is a MT200 to.

Kim:
My MT200 takes a little more than one whole minute before coming out of Protect.  I can get it a bit sooner by shining a flashlight into the front vents. 

In "light" of this, see if it comes on sooner when the unit is out of the rack and the top lid is off.   

El Chiguete:
What is ¨protect¨, mode?

Navigation

[0] Message Index

[#] Next page