ADA Depot - A Forum To Support Users of ADA Amplification Gear

ADA Preamps => Original MP-1 => Topic started by: 2112 on November 09, 2017, 12:54:27 AM

Title: MP-1 Development History/Timeline
Post by: 2112 on November 09, 2017, 12:54:27 AM
(Mods please move if this isn't the right place to post this).

Has anyone compiled a history/timeline of the development and release of the MP-1, including firmware history and board revisions?

I haven't been able to find a whole lot of information except for bits and pieces (Todd Langner being involved for one), so if anyone could point me in the right direction or provide a run down that would be greatly appreciated.

Title: Re: MP-1 Development History/Timeline
Post by: MarshallJMP on November 09, 2017, 04:50:57 AM
Well there were 7 board revisions, A to G and 5 firmware versions V1.36,V1.37,V1.38,V2.00 and V2.01.Of the midi board there were 2 versions.
Now for a timeline, we could do that if we compare the date codes on the IC's with the revision.
Title: Re: MP-1 Development History/Timeline
Post by: rnolan on November 09, 2017, 05:13:28 AM
No worries, moved to MP1 area.
So MJMP, Kim and Harley (who we haven't heard from for a bit) seem to have a decent handle on time lines etc.  I kind of know a bit about them from an Australian perspective as I used to do the guitar repairs for Pro Audio who were the Australian distributor (and Nunzio (the owner back then) is a friend of mine..).  But he didn't bring in everything (as I've found out later when I discovered the Depot many years ago).
So I bought one of the first MP1s Nunz imported (1987 ish ?), a V1 hardware unit (with top switch for Inst/line output level) probably 1.38 EPROM, and I upgraded the EPROM once along the way. MikeB now has this unit and has modernised it (MDRT, SS tube board, v2.01 EPROM, noise mod, battery mod, rear jack mod etc).  I sold it to Mike to buy the MP2 when it came into the country.  I don't think Nunz ever bought the MP1 classic to Australia  :dunno: as they came after the MP2.
Title: Re: MP-1 Development History/Timeline
Post by: rnolan on November 09, 2017, 05:15:38 AM
Ahh MJMP you snuck in will I was typing  :thumb-up:
Title: Re: MP-1 Development History/Timeline
Post by: 2112 on November 12, 2017, 07:48:10 AM
No worries, moved to MP1 area.
So MJMP, Kim and Harley (who we haven't heard from for a bit) seem to have a decent handle on time lines etc.  I kind of know a bit about them from an Australian perspective as I used to do the guitar repairs for Pro Audio who were the Australian distributor (and Nunzio (the owner back then) is a friend of mine..).  But he didn't bring in everything (as I've found out later when I discovered the Depot many years ago).
So I bought one of the first MP1s Nunz imported (1987 ish ?), a V1 hardware unit (with top switch for Inst/line output level) probably 1.38 EPROM, and I upgraded the EPROM once along the way. MikeB now has this unit and has modernised it (MDRT, SS tube board, v2.01 EPROM, noise mod, battery mod, rear jack mod etc).  I sold it to Mike to buy the MP2 when it came into the country.  I don't think Nunz ever bought the MP1 classic to Australia  :dunno: as they came after the MP2.

That's fascinating. My MP-1 previously belonged to my Dad, who sold it to my uncle who I bought it back from. From memory he ordered it from pro audio at a similar time!
Title: Re: MP-1 Development History/Timeline
Post by: rnolan on November 13, 2017, 12:35:55 AM
There was nothing else like them in the day, suddenly I could have 128 sounds at whatever level compared to one another, and run it all in stereo, never looked back  :metal: .
Title: Re: MP-1 Development History/Timeline
Post by: Chip Roberts on November 13, 2017, 01:07:23 PM
I'd actually be really interested in a comprehensive coffee table book about ADA as a company, but especially the MP1 as it is such a unique unit, but there's not a whole lot of information about its history.