ADA Depot - A Forum To Support Users of ADA Amplification Gear

Other ADA Gear => Step On It! => Topic started by: VoxG2 on February 25, 2017, 11:39:08 AM

Title: MPC vs MC-1 with MP-1
Post by: VoxG2 on February 25, 2017, 11:39:08 AM
   Pros vs Cons? I'm gonna find of em. Thanks.
Title: Re: MPC vs MC-1 with MP-1
Post by: Kim on February 25, 2017, 11:58:37 AM
I haven't owned or even tried an MPC, but I did have an MC-1 at one time.

It is very long, and it wouldn't fit in my rackcase at the time for easy transport.
It didn't have separate Bank Up and Bank Down buttons.....there is a Bank Up button and that must be pressed with the "0" button at the same time to Bank Down. 

Other than that I found it worked fine.  I sometimes had trouble pressing only one button at a time with my foot though.  lol
Title: Re: MPC vs MC-1 with MP-1
Post by: MarshallJMP on February 25, 2017, 01:29:25 PM
Like Kim said, the MC-1 is quite long but on the other hand all the buttons are next to each other.
Title: Re: MPC vs MC-1 with MP-1
Post by: VoxG2 on February 25, 2017, 03:02:09 PM
   Does the MPC work seamlessly for the MP-1? If I'm not mistaken, wasn't that built for the Quad amp thing?
Title: Re: MPC vs MC-1 with MP-1
Post by: VoxG2 on February 25, 2017, 03:04:06 PM
...and thank you.
Title: Re: MPC vs MC-1 with MP-1
Post by: Harley Hexxe on February 25, 2017, 04:13:00 PM
The MPC and MC-1 are essentially the same thing, just a different shape box. Any MIDI controller will work for program changes in the MP-1.
Title: Re: MPC vs MC-1 with MP-1
Post by: VoxG2 on February 25, 2017, 04:34:47 PM
   Thanks man! Another question on the quad thread...lol :-(
Title: Re: MPC vs MC-1 with MP-1
Post by: MarshallJMP on February 27, 2017, 10:31:58 AM
   Does the MPC work seamlessly for the MP-1? If I'm not mistaken, wasn't that built for the Quad amp thing?

That was the MXC because it can do control changes.
Title: Re: MPC vs MC-1 with MP-1
Post by: VoxG2 on March 04, 2017, 07:33:30 AM
     I picked up a MIDI BUDDY, so hopefully that does the trick! Sounds like Kim is the guy who's had success with that one. Again, thanks for all the help. It's saved me much time and frustration!