Hey david, welcome to the depot
, and we are happy to help as much as we can
.There are some posts about the MP2 motorboating if you dig around. It was quite a while ago it came up IIRC This post (http://adadepot.com/index.php?topic=177.msg820#msg820) is related to it. You can do the MP2 noise mod, replace 21 caps and a resistor, IMO the resistor (R913
) is the most important (if it needs replacing), if you get 190v or just under (around 187v) at the test point then it doesn't. The problem comes when the test point voltage exceeds 190v. MJMP puts a kit together with all the components you need for the mod (http://www.marshalljmpmodshop.net/miscellaneous_parts_and_replacement_tubes.htm).The MP1 should sound good out of the box, factory patch 1 (Marshall) should sound very usable, I used it as a starting point for most of my MP1 patches. So I'd try reloading the factory patches:LOAD ALL 69 PRESETS:
1. Press the STORE button. lt will light.
2. Press the BANK button and while holding the BANK button down press the number 1 button.
3. The display will read "Presets Loaded" When the display returns to a program number, all 69 factory presets have, been restored.
If patch 1 still doesn't sound good, it could be tubes, always worth putting in some new ones anyway.
I suggest you start 2 new topics one for your MP2 and one for your MP1 either in their respective areas or in the Lets get technical and we'll work through the issues with you