ADA Depot - A Forum To Support Users of ADA Amplification Gear

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please note "Depot New Registrations Temporarily Suspended" Please see discussions for how to register.

Pages: [1]   Go Down

Author Topic: MC1 Power Supply  (Read 1754 times)

0 Members and 1 Guest are viewing this topic.

Chip Roberts

  • Full Member
  • ***
  • Offline Offline
  • Posts: 188
  • Anything worth doing is worth overdoing.
    • Chip Roberts Official
MC1 Power Supply
« on: Time Format »

From what I understand, the MC1 has a 7 pin for phantom power via the MP1.  My question is what power supply can I get that would work with the 9V out?  I use a PowerAll for my pedals.
Logged
Rack of Death:
MP1 v2.01/Roland GP8/Boss NS50/ADA B200s

Pedalboard:
Boss TU2, Mooer Pitchbox, Boss BF2, Boss CE5, MXR EVH Phase 90, Behringer HB01 Wah/ART X15 Ultrafoot/

Cabinet:
Custom 2X12 with WGS Retro 30/HM75

Harley Hexxe

  • Superhero Member
  • ******
  • Offline Offline
  • Posts: 1965
Re: MC1 Power Supply
« Reply #1 on: Time Format »

If I recall correctly,

           The ADA wall wart is 9V DC with 500mA, so any similar wall wart will work, but you have to change the plug to a "N" type barrel plug. I did that with one I had laying around, and it still works to this day.  Center pin is negative.

     Harley 8)
« Last Edit: Time Format by Harley Hexxe »
Logged
I only have two brain cells left, ...and I'm saving them for the weekend!

MarshallJMP

  • Superhero Member
  • ******
  • Offline Offline
  • Posts: 4702
    • marshalljmpmodshop.net
Re: MC1 Power Supply
« Reply #2 on: Time Format »

It also works with a 9Vac adapter, this way you don't need to worry about the polarity of the jack (which is 2.5mm)
Logged
Pages: [1]   Go Up